Borderlands 2 Save Editor (Revision 219)

Get the new version.
Hotfix to fix saving of vehicle skins.

  • Adding new entries to collections in the Raw tab should now work properly instead of causing errors.
  • Can now edit overpower level.
  • Added keyboard shortcut for item duplication.
  • Backpack and bank sync buttons now synchronize to level + overpower level.
  • Corrected maximum level to 72.
  • Can now import data into your save from other saves.
  • Many other fixes (see revisions.txt).
  • Fixed saving of vehicle skins.

Download.

If you encounter any problems (crashes, etc), feel free to comment this post.

Tags: , ,

266 Responses to “Borderlands 2 Save Editor (Revision 219)”

  1. Frank says:

    Hey for the past 2 revisions i cannot open the editor. I extracted the whole folder to a folder on my desktop and ran the program as an administrator. Still not opening. Please Help

  2. AliveinaGrave says:

    Wow, so fast, much appreciated.

  3. jeff says:

    says i cannot open xbox 360 con files. i used horizon and my friend used modio and we both had the same result. please help

    • DOMIN8 says:

      You need to extract the SaveGame.sav from your Xbox container save.

      • PINE says:

        first copy and put it in ur USB then open horizon,go to xbox modders,then plug the USB inside.Right click the save that was in the USB and click contents,extract the file and put it in ur desktop,go to gibbed editor and click on desktop and find the file,remember to change it to xbox saves instead of PC.And start modding!!!:)

  4. mike says:

    will this new revision allow us to use modded weapons again or will the sanity check still remove them?

  5. ddulmage says:

    thanks for all your work and for making it less possible for overpower modded rifle.

  6. kelbin says:

    ive never been able to open gibbed with any update. when i try installing .net framework, it says i already have it so i know thats not the issue. Help?

    • WOOFWOLFWOOF says:

      Answers fixed.
      Invalid or unsupported version (FIXED)
      Must be only opening “savegame.sav” inside content folder of the “savegame01” or what ever number…..
      Then when you press “OPEN” before searching for the save make sure you pressed the “PC save file.sav” at the bottom right of the *open window*
      and change it to “xbox 360 File.sav” or “ps3 save file.sav” Then your save will be opened..
      __
      I dont blame you for not noticing..
      i didn’t notice at first ๐Ÿ˜€
      Hoped this helped..

  7. Jimmy says:

    Is it true that only quests that have been accepted can be completed in gibbed?

    I marked all of them as complete, but went into my game only to find more undiscovered quests.

    I heard somewhere that you have to use python?

    Is there any plans to make gibbed able to complete undiscovered quests?

    Kudos to the creator of gibbed, it’s a great program!

  8. turtle says:

    Just awesome ty

  9. tsrdps says:

    To Rick:
    Overpower Level CANNOT be edited !!! We may as well choose Op8 in the game !!! It will do enormous harm to the Co-op Game Modelใ€‚ Please Please Withdraw your Re 219.

  10. Satvir says:

    How does the import feature work?

  11. Ryan says:

    Awesome job Rick! Thank you for the editor.

  12. gygk says:

    How do you mod the OVERPOWER REQUIREMENTS? I see the option in the Save Editor but after I did it I still cant use them?

  13. James says:

    As usual an awesome job Rick! Thanks a bunch for the editor. I normally use it to tweak my weapons within the parameters of the game. Keep up the great work!

  14. Emmanuel says:

    Hi.
    firstly thanks for an awesome program.
    My question is that is it possible to delete everything in your bank in one go.
    Emmanuel.

  15. Jimmy says:

    Hey ๐Ÿ™‚

    I know I already posted, but this missions thing is driving me nuts!

    Since there isn’t an easy way to import mission data at this time, could someone please point me in the direction of a GOOD tutorial on how to have ALL MISSIONS COMPLETED using Python please?

    I followed one video, and I loaded the game up only to find that my story progression had been reset and I was at the very beginning of the game…. ๐Ÿ™

    Thank you.

  16. Ryan says:

    Does anybody know why the prefix and title gets deleted with OP9+ gear? I assume it has something to do with the game not recognizing the higher OP levels correct?

  17. amerman says:

    I cant open gibbed, it wont let me every time i try to do so my computer gives me protect your pc alert, and says this file may put your computer at risk.

  18. allen says:

    How do you make the overpower lvl 55 weapons work? I set the overpower to 55 in the RAW tab and put all weapons to op55 and I still can’t use them.

  19. alex says:

    it says its invalid or unsupported version???

  20. cooper says:

    can someone give me a tut on how to use this because i have no idea what to do

  21. Justin says:

    Hey Rick,

    Just wanted to say thank you so much for all of the effort you have put and are currently putting into this! You’re doing an amazing job! I really, really appreciate and love the save editor!

    Keep up the excellent work with the continuous updates, fixes, and feature additions!

    Cheers,

    -Justin ๐Ÿ™‚

  22. bark woof says:

    Could someone please define the four import categories: Skills, missions, world and stats. I assume skills is the skill tree but would it cross characters? Missions seems obvious. World and state I’m really unclear on. I would like to be able to adjust badass but haven’t been able to on PS3.

    • DOMIN8 says:

      World imports FullyExploredAreas, WorldDiscoveryData and RegionGameStageData. Stats imports ChallengeData.

      • bark woof says:

        So then if I want to force a reset I can import off a new character and clear all the easy challenges while not getting 2000 critical hit kills with a sniper rifle? That’s cool. Still no way to adjust badass on PS3 then?

  23. yuna86 says:

    I play borderlands 2 PC and play on Normal Mode and enemies is very easy. How to change game mode from Normal to Ultimate Vault Hunter Mode, without play a new game?

  24. mike says:

    —————————
    Error
    —————————
    An exception was thrown (press Ctrl+C to copy):

    System.TypeLoadException: Could not load type ‘Gibbed.Borderlands2.FileFormats.SaveExpansion’ from assembly ‘Gibbed.Borderlands2.FileFormats, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null’.

    at Gibbed.Borderlands2.SaveEdit.ShellViewModel.c__DisplayClass21.b__16()

    at Caliburn.Micro.Contrib.Results.DelegateResult.Execute(ActionExecutionContext context)
    —————————
    OK
    —————————
    What am I doing wrong

  25. John says:

    Hey love your editor however there is a problem when i scale up from OP8 all the names of what ever i have in in my inventory disappear
    for example I’m set at lvl 72 OP 30 sync all gives me an OP 102 PERFECT reload on ps3 play and notice no names on all my guns shields what ever
    only everything els is there pls fix thank you

    • Rick says:

      This is a bug caused by items being leveled past their intended levels, it cannot be fixed via the save editor other than reducing the item level back to normal levels. Gearbox is more likely to fix exceeding OP 8 than they are in fixing item names for exploited items.

      • bark woof says:

        Even when they already have the names the game itself assigns the name when you put it in the equipped slot. For example a slag jun changed to fire wills have a name changed when you move it. It is not a bug it’s the way B2 works.

  26. martyn says:

    Great editor. I have been using deftoned op55 save and its been working great.
    But all of a sudden when I click continue it no longer lets me pick my op level.
    So all of my weapons are in red because the level is to high for me to use.
    I have tried to reload the save and checked it out in the editor and it is set to op55.
    Why can’t I pick my op level any more.
    Anyone else had this problem

  27. alex novikov says:

    when will we be able to edit challenge progress? I don’t care about BAR I just want to spare myself the misery of finding jenkins 13 more times. since we can import challenge data why not edit it?

  28. Killtastic420 says:

    Won’t let me open up application from WinZip. Keep’s saying Application has stopped working. What to do?!

  29. brian says:

    hello, i am trying to run this on my ps 3. i have version 219, brute force save data and NET 4.5 and i get to the end and when i click refresh it doesn’t update my file to the modded one, it just stays the same. any and all help will be appreciated. i do it the way i have seen it on youtube (demon asylum) and everything is fine until i refresh it.

      • brian says:

        did not work, i will go through the steps and you can tell me where i am going wrong. i put the save file for my character i want to mod on the flash, plug it into my computer, copy the save file on to my desk top, run the bluntforce decrypt, open up my gibb version 219, make changes to the file, when i am done hit save and save the file, go back to bluntforce and hit update pdf, (do all the steps in the video basically) but it doesn’t work. it is saving the file in the gibb but it is not going back into the bluntforce save, it is staying the same as it was when i first opened it up…level 31 salvador and no change to currency it makes no changes to the file at all. i did the trick on here and saved it to the desktop point and moved that to the flash with no luck whatsoever again. if i go back into the gibb all the changes are saved there but the file in bluntforce doesn’t change.

        • DOMIN8 says:

          Update PFD full. Then Verify PFD. Copy the folder back to your USB and then Delete Selected Save Data in Bruteforce to refresh it. That should do the trick.

          • brian says:

            i probably had it all along, it wasn’t showing up when i plugged my usb back into the ps3 as 61…it still said 31 so i started a game with that character and viols it was on there!! thank you so much for tolerating my stupidity! sooooo many thanks are in order!

          • DOMIN8 says:

            Yeah I think I mention in my video that it doesn’t update the save info until you load it up in game… ๐Ÿ™‚

  30. Davell says:

    the game is sanitizing all elemental relics and bone of the ancients except for type A. thought you guys should know.

  31. Rafael says:

    Ok i have one problem when i finish editing my pc savefile and i go to save
    i save it rename it ect ect and make sure its in the right folder for the game to load it up
    but when i get into the game my edited file isnt there at all what am i doing wrong

  32. robert says:

    So am i correct in thinking there is no way to alter the badass ranks on my profile? i cant even load another blank profile with my id transfered to it…please help…

    • DOMIN8 says:

      This isn’t really related to Gibbed….

      But, you should be able to use any Blank profile or you can use any profile as long as you have a Game Genie or Xploder.

  33. Satvir says:

    I have started seeing people with modded grenade, not sure how they do it but it works online.

  34. Joey says:

    I’m trying to modify the skill points for Gaige but they don’t work.

  35. @timber2408 says:

    So…i have been using this editor for awhile now. and i am still getting “failed to load save: reencode mismatch”. YES i did check to make sure it was in 360 save. downloaded new editor and everything. please someone help! i also downloaded new version of Horizon. i dont know what is going wrong. if you would like Tweet me back at @Timber2408.

    Thanks

  36. Evil says:

    The “Bank” and “Unbank” functions still don’t work. This should be EASY to fix (simply cutting and pasting item codes between locations).

    • Evil says:

      Also, the ability to select multiple items to Bank/Unbank/CopyCodes would be spectacular!

      I REALLY like the idea another poster had to create a special “Offline Bank” where you could store your items outside of the game. Maybe call it a “Vault”, and add a Vault button/option. That would greatly satisfy my hoarding addiction.

  37. Lol says:

    How do you edit Weapon’s Overpower Level?

  38. Steve says:

    Is there any way to transfer one character’s inventory and bank items to another character?

  39. Chris says:

    What does it mean when there is a red box around a weapon selection in the editor?

    • DOMIN8 says:

      It means that particular part is not possible on that weapon. The most common case of this I would say is probably trying to put a DLC part on a non-DLC weapon.

  40. ToMOdz9 says:

    Hey please can you add an option to create shields if it is possible?!

  41. Guy says:

    how do you use the duping feature? no idea what to do after i select it

    • Satvir says:

      First select an item that you want to duplicate then right click on that item and choose “duplicate” and it will copy that same item again.

  42. Teix says:

    I cant open 360 saves with this tool, but I can open pc saves but not 360 saves what am I doing wrong ?

  43. AL says:

    It sill doesnt work for me :/ “failed to load save: reencode mismatch”

  44. yuna86 says:

    Any idea to edit Badass Bonus?

  45. Doomcreeper says:

    how to fix Ingame achievements?

  46. Dimon485 says:

    How can I open all 4 weapon slots for lowlevel pers? Is it possible at all in your tool?

  47. KingSal says:

    Running horizon and Gibbed as Admin, Extracted gamesave.save to desktop when i go to open it in Gibbed i still get an error “Failed to Load save: Invalid or unsupported version”. Running 219

  48. Andrew says:

    I cant open raw or the fast travel tab can someone help plz

    • DOMIN8 says:

      What do you mean that you can’t open them?

      • Andrew says:

        when I go to open the application every tab works its when I load my saved game to it those two tabs just don’t open

        • DOMIN8 says:

          That’s a new one on me… My only suggestion would be to re-install/repair your .NET 4 Framework but, I’ve never seen anyone have that issue before…

          • thorlongus says:

            got a new error.

            —————————
            Error
            —————————
            An exception was thrown (press Ctrl+C to copy):

            System.FormatException: One of the identified items was in an invalid format.
            at Gibbed.Borderlands2.FileFormats.Items.PackedDataHelper`2.Decode(Byte[] data)
            at Gibbed.Borderlands2.SaveEdit.BackpackViewModel.ImportData(WillowTwoPlayerSaveGame saveGame)
            at Gibbed.Borderlands2.SaveEdit.ShellViewModel.c__DisplayClass1c.b__17()
            at Caliburn.Micro.Contrib.Results.DelegateResult.Execute(ActionExecutionContext context)
            —————————
            OK
            —————————

          • Andrew says:

            I repaired my .net 4 framework and still does it I’m thinking its my computer

  49. WFO907 says:

    “Failed to load save; invalid SHA1 hash” keep getting even if repair .NET Frameworks’ and was working fine for R197 then update and will not work now.
    Advice?

    • Satvir says:

      Select your preferred console at bottom right & as for “repair your .net framework” also remove any older version & the new one then reinstall the latest version.

      • DOMIN8 says:

        โ€œFailed to load save; invalid SHA1 hashโ€ usually means that your save file isn’t decrypted properly. Did you make any changes to your Bruteforce?